2010-15 Camaro Manual Rack and Pinion - Replaces OEM Electric Power Steering Rack

This all-new manual rack and pinion design is a direct-fit unit for the 2010-15 Camaro. This rack is a manual rack and pinion that is designed to replace the OEM Electric Power Steering setup that may come installed on your Camaro. Please check your vehicle; GM used Electric Power Steering or Hydraulic Power Steering in select Camaro models in this year span. This rack is significantly lighter than the factory power steering system by eliminating hoses, pulleys and pumps and offers improved handling characteristics. A shorter pinion shaft allows for more clearance when working with large tube headers and engine swaps in custom applications. Made in USA.

Product Specs:

• Bolts into same mounting location as OEM Power Rack
• Overall length: 53”
• Pivot points: 30.97”
• Mounts center-to-center: 24.81”
• 9/16"-26 spline pinion shaft (Requires FR1709DD for install)
• Inner tie rod end thread: M16 X 1.5
• Inner tie rod end length: 13.95”