My Cart 0

65-70 Mustang Bump Steer Kit w/Granada Spindle Conversion


65-70 Mustang Bump Steer Kit w/Granada Spindle Conversion

Has the height of your suspension been altered from the original specs? Flaming River now has a solution to improve your handling issue. Our new bump steer kit has been designed to assist you in re-aligning your steering geometry. Simply replace your current outer tie rod ends with the new tie rod ends, using the provided spacers to adjust the angle as needed.  These adjustable outer tie rod end replacements feature 6061 T-6 aluminum, fully machined sleeve with a black anodized finish, a Teflon lined 5/8” heim joint and 4140 steel pin. The pin is machined with the correct taper for the Granda spindle. Teflon-lined heim reduces noise and does not require lubrication.

Correct Bump Steer Issues.

9/16-18 RH Thread

Connects to Flaming River Power or Manual Rack Conversion kit Tie Rod with Granada Spindle Conversion.

Improve Your Vehicle’s Handling

More Information
Weight 10.000000
Shipping Dimensions 10" x 10" x 13"
Warranty 1 Year
! California Warning: Cancer & Reproductive Harm –